Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Maruyama, Shuhei; Endo, Tomohiro*; Yamamoto, Akio*
Journal of Nuclear Science and Technology, 61(1), p.31 - 43, 2024/01
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)This study investigated the feasibility of reducing the uncertainty associated with fast-reactor-core design by sharing an experimental database between different fields (e.g., reactor physics and radiation shielding) using data assimilation techniques. As the first step in this study, we focused on the ORNL sodium shielding experiment and investigated the possibility of using the experimental data to reduce the uncertainty in sodium void reactivity (SVR), which is the most important safety parameter for sodium-cooled fast reactors. A sensitivity analysis based on the Generalized Perturbation Theory was performed for the sodium shielding experiment. Using the sensitivity coefficients evaluated here and those of the sodium void reactivity previously evaluated by the JAEA, we showed that sodium shielding experimental data can contribute to the uncertainty reduction of SVR by adopting the cross-section adjustment method. Based on this study, the uncertainty reduction effect is expected to be significant, especially for SVR dominated by neutron-leakage phenomena. Although new reactor physics experimental data on SVR may be difficult to obtain, the results of this study suggest that data from sodium shielding experiments can partially substitute for this role. This study demonstrated the value of the mutual use of integral experimental data in fast reactor designs.
Inamura, Yasuhiro
JAEA-Testing 2023-002, 80 Pages, 2023/12
JAEA-Testing-2023-002.pdf:2.43MB
"Utsusemi" is a suite of software used to process data obtained from measurements of neutron scattering experiments at the Materials and Life Science Experimental Facility (MLF), J-PARC. To directly obtain the physical quantities which scientists want to get from the data produced by instruments at MLF, many processes are required, such as creating histogram format data, easily visualizing and converting units and correcting intensity adapting the instrument conditions. "Utsusemi" software consists of many software components, many functions for data processing, graphical interface software for executing Utsusemi functions, data visualization applications, and so on. "Utsusemi" has already played an important role in data processing and has been widely employed in MLF beamlines. This document describes how to install the "Utsusemi" software on each operating system to be of help of instrument staff and users who want to process data by themselves. Installation of "Utsusemi" on Windows and macOS requires only general knowledge of working with PC applications according to this document.
Hasegawa, Yuta; Onodera, Naoyuki; Asahi, Yuichi; Ina, Takuya; Imamura, Toshiyuki*; Idomura, Yasuhiro
Fluid Dynamics Research, 55(6), p.065501_1 - 065501_25, 2023/11
Times Cited Count：0 Percentile：0.01(Mechanics)We investigate the applicability of the data assimilation (DA) to large eddy simulations (LESs) based on the lattice Boltzmann method (LBM). We carry out the observing system simulation experiment of a two-dimensional (2D) forced isotropic turbulence, and examine the DA accuracy of the nudging and the local ensemble transform Kalman filter (LETKF) with spatially sparse and noisy observation data of flow fields. The advantage of the LETKF is that it does not require computing spatial interpolation and/or an inverse problem between the macroscopic variables (the density and the pressure) and the velocity distribution function of the LBM, while the nudging introduces additional models for them. The numerical experiments with 
grids and 10% observation noise in the velocity showed that the root mean square error of the velocity in the LETKF with 
observation points (
of the total grids) and 64 ensemble members becomes smaller than the observation noise, while the nudging requires an order of magnitude larger number of observation points to achieve the same accuracy. Another advantage of the LETKF is that it well keeps the amplitude of the energy spectrum, while only the phase error becomes larger with more sparse observation. From these results, it was shown that the LETKF enables robust and accurate DA for the 2D LBM with sparse and noisy observation data.
Pb and 
Bi in proton-induced reactions near 100 MeVIwamoto, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Yashima, Hiroshi*; Nishio, Katsuhisa; Sugihara, Kenta*; 
elik, Y.*; et al.
Nuclear Instruments and Methods in Physics Research B, 544, p.165107_1 - 165107_15, 2023/11
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)The lack of double-differential cross-section (DDX) data for neutron production below the incident proton energy of 200 MeV hinders the validation of spallation models in technical applications, such as research and development of accelerator-driven systems (ADSs). The present study aims to obtain experimental DDX data for ADS spallation target materials in this energy region and identify issues related to the spallation models by comparing them with the analytical predictions. The DDXs for the (
) reactions of Pb and Bi in the 100-MeV region were measured over an angular range of 30
to 150 using the time-of-flight method. The measurements were conducted at Kyoto University utilizing the FFAG accelerator. The DDXs obtained were compared with calculation results from Monte Carlo-based spallation models and the evaluated nuclear data library, JENDL-5. Comparison between the measured DDX and analytical values based on the spallation models and evaluated nuclear data library indicated that, in general, the CEM03.03 model demonstrated the closest match to the experimental values. Additionally, the comparison highlighted several issues that need to be addressed in order to improve the reproducibility of the proton-induced neutron-production DDX in the 100 MeV region by these spallation models and evaluated nuclear data library.
Suyama, Kenya; Ueki, Taro; Gunji, Satoshi; Watanabe, Tomoaki; Araki, Shohei; Fukuda, Kodai; Yamane, Yuichi; Izawa, Kazuhiko; Nagaya, Yasunobu; Kikuchi, Takeo; et al.
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 6 Pages, 2023/10
To remove and store safely the fuel debris generated by the severe accident of the Fukushima Daiichi Nuclear Power Station in 2011 is one of the most important and challenging topics for decommissioning of the damaged reactors in Fukushima. To validate the adopted method for the evaluation of criticality safety control of the fuel debris through comparison with the experimental data obtained by the criticality experiments, the Nuclear Regulation Authority (NRA) of Japan funds a research and development project which was entrusted to the Nuclear Safety Research Center (NSRC) of Japan Atomic Energy Agency (JAEA) from 2014. In this project, JAEA has been conducting such activities as i) comprehensive computation of the criticality characteristics of the fuel debris and making database (criticality map of the fuel debris), ii) development of new continuous energy Monte Carlo code, iii) evaluation of criticality accident and iv) modification of the critical assembly STACY for the experiments for validation of criticality safety control methodology. After the last ICNC2019, the project has the substantial progress in the modification of STACY which will start officially operation from May 2024 and the development of the Monte Carlo Code "Solomon" suitable for the criticality calculation for materials having spatially random distribution complies with the power spectrum. We present the whole picture of this research and development project and status of each technical topics in the session.
Tada, Kenichi
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 8 Pages, 2023/10
The number of energy grids of the thermal neutron scattering law data has a large impact on the data size of a cross section file of continuous energy Monte Carlo calculation codes. The optimization of the number of energy grids is an effective way to reduce the data size. This study developed the linearization method of the thermal neutron scattering cross section to optimize the number of energy grids and the linearization function was implemented in the nuclear data processing code FRENDY. The linearization process which is used in the resonance reconstruction and the Doppler broadening was adopted. The criticality benchmarks which use ZrH as the moderator were calculated to estimate the impact of the difference of the energy grids on neutronics calculations. The calculation results indicate that the linearization of the thermal neutron scattering cross section improves the prediction accuracy of neutronics calculations.
Gunji, Satoshi; Araki, Shohei; Watanabe, Tomoaki; Fernex, F.*; Leclaire, N.*; Bardelay, A.*; Suyama, Kenya
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 9 Pages, 2023/10
Institut de radioprotection et de s
ret
nuclaire (IRSN) and Japan Atomic Energy Agency (JAEA) have a long-standing partnership in the field of criticality safety. In this collaboration, IRSN and JAEA are planning a joint experiment using the new STACY critical assembly, modified by JAEA. In order to compare the codes (MVP3, MORET6, etc.) and nuclear data (JENDL and JEFF) used by both institutes in the planning of the STACY experiment, benchmark calculations of the Apparatus B and TCA, which are critical assemblies once owned by both institutes, benchmarks from the ICSBEP handbook and the computational model of the new STACY were performed. Including the new STACY calculation model, the calculations include several different neutron moderation conditions and critical water heights. There were slight systematic differences in the calculation results, which may have originated from the processing and/or format of the nuclear data libraries. However, it was found that the calculated results, including the new codes and the new nuclear data, are in good agreement with the experimental values. Therefore, there are no issues to use them for the design of experiments for the new STACY. Furthermore, the impact of the new TSL data included in JENDL-5 on the effective multiplication factor was investigated. Experimental validation for them will be completed by critical experiments of the new STACY by both institutes.
Tada, Kenichi
Kaku Deta Nyusu (Internet), (135), p.1 - 10, 2023/06
This article summarizes presentations at the IAEA technical meeting on nuclear data processing. In this technical meeting, the current development status of nuclear data processing codes and comparisons of the processing results using these codes were presented.
Tada, Kenichi; Endo, Tomohiro*
EPJ Web of Conferences, 284, p.14013_1 - 14013_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)The self-shielding effect in the unresolved resonance region has a large impact on the fast- and intermediate-spectrum reactors. The probability table method is widely used for continuous-energy Monte Carlo calculation codes to treat the effect. In this method, a table provides the probability distribution of the cross-section for a nuclide in the given energy grid points. The table is generated by averaging with a lot of "ladders" which represent pseudo resonance structures. Though many nuclear data processing codes require the number of ladders as an input parameter to generate the probability table, an optimal number of ladders has not been investigated. Our previous study revealed that the suitable number of ladders depends on the nuclide and its resonance parameters. This result indicates that it is very difficult for users to find the optimal number of ladders. We developed the calculation method of the statistical uncertainty for the probability table generation.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.
Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Asahi, Yuichi; Inagaki, Atsushi*; Shimose, Kenichi*; Hirano, Kohin*
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 28, 4 Pages, 2023/05
We have developed a multi-scale wind simulation code named CityLBM that can resolve entire cities to detailed streets. CityLBM enables a real time ensemble simulation for several km square area by applying the locally mesh-refined lattice Boltzmann method on GPU supercomputers. On the other hand, real-world wind simulations contain complex boundary conditions that cannot be modeled, so data assimilation techniques are needed to reflect observed data in the simulation. This study proposes an optimization method for ground surface temperature bias based on an ensemble Kalman filter to reproduce wind conditions within urban city blocks. As a verification of CityLBM, an Observing System Simulation Experiment (OSSE) is conducted for the central Tokyo area to estimate boundary conditions from observed near-surface temperature values.
Tada, Kenichi; Nagaya, Yasunobu; Taninaka, Hiroshi; Yokoyama, Kenji; Okita, Shoichiro; Oizumi, Akito; Fukushima, Masahiro; Nakayama, Shinsuke
Journal of Nuclear Science and Technology, 21 Pages, 2023/04
Times Cited Count：6 Percentile：98.92(Nuclear Science & Technology)The new version of the Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. This paper demonstrates the validation of JENDL-5 for fission reactor applications. Benchmark calculations are performed with the continuous-energy Monte Carlo codes MVP and MCNP and the deterministic code system MARBLE. The benchmark calculation results indicate that the performance of JENDL-5 for fission reactor applications is better than that of the former library JENDL-4.0.
Tada, Kenichi
Robutsuri No Kenkyu (Internet), (75), 13 Pages, 2023/03
In addition to nuclear data processing, FRENDY has various functions such as editing nuclear data and plotting cross section data. This document introduces these functions.
Tada, Kenichi
Shahei Kaiseki No V&V Gaidorain Sakutei Ni Mukete, p.11 - 16, 2023/03
An overview of the nuclear data processing code FRENDY is introduced for shielding calculation code users who are not familiar with FRENDY. This paper explains the nuclear data processing flow in FRENDY, the purpose of use, input examples, verification and validation reports, and so on.
Okumura, Keisuke; Sakamoto, Yukio*; Tsukiyama, Toshihisa*
Shahei Kaiseki No V&V Gaidorain Sakutei Ni Mukete, p.4 - 8, 2023/03
no abstracts in English
Tada, Kenichi; Yamamoto, Akio*; Kunieda, Satoshi; Konno, Chikara; Kondo, Ryoichi; Endo, Tomohiro*; Chiba, Go*; Ono, Michitaka*; Tojo, Masayuki*
Journal of Nuclear Science and Technology, 10 Pages, 2023/00
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Nuclear data processing code is important to connect evaluated nuclear data libraries and radiation transport codes. The nuclear data processing code FRENDY version 1 was released in 2019 to generate ACE formatted cross section files with simple input data. After we released FRENDY version 1, many functions were developed, e.g., neutron multi-group cross section generation, explicit consideration of the resonance interference effect among different nuclides in a material, consideration of the resonance upscattering, ACE file perturbation, and modification of ENDF-6 formatted file. FRENDY version 2 was released including these new functions. It generates GENDF and MATXS formatted neutron multi-group cross section files from an ACE formatted cross section file or an evaluated nuclear data file. This paper explains the features of the new functions implemented in FRENDY version 2 and the verification of the neutron multigroup cross section generation function of this code.
Nakayama, Shinsuke
Kaku Deta Nyusu (Internet), (133), p.88 - 99, 2022/10
The content of the paper that received the Paper Award of Atomic Energy Society of Japan in 2021 is outlined. Although the use of deuteron accelerator-based neutron sources has been proposed in various fields, deuteron nuclear database accurate enough to be applied to the design study of such neutron sources had not been developed. Under these situations, we had developed a deuteron nuclear database, JENDL/DEU-2020. It contains evaluated deuteron nuclear data for light nuclei (
Li, 
Be, 
C), which are candidates for deuteron beam irradiation targets of the neutron sources. Evaluation of JENDL/DEU-2020 was performed by using the code system DEURACS with further modifications. In order to validate the accuracy of the database, simulations using the particle transport code were performed under various conditions with different target nuclides and incident deuteron energies, and the results were compared with the available experimental data. As a result, it was found that JENDL/DEU-2020 significantly improves the prediction accuracy of experimental data under a wider range of conditions than other nuclear reaction databases or the nuclear reaction models implemented in transport calculation codes.
Okumura, Keisuke
Kaku Deta Nyusu (Internet), (133), p.63 - 67, 2022/10
no abstracts in English
Yokoyama, Kenji; Taninaka, Hiroshi
Kaku Deta Nyusu (Internet), (132), p.25 - 33, 2022/06
This article explains the results of integral test of JENDL-5 by benchmark analysis in fast reactor system, which were presented in a special session of the 2022 Spring Annual Meeting of the Atomic Energy Society of Japan (AESJ). The latest version of Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. In order to confirm the applicability of JENDL-5 to the fast reactor system, we conducted a set of benchmark analysis using the integral experiment data included in the fast reactor nuclear design database which is being developed by JAEA. With respect to major nuclear characteristics in the standard fast reactor system, it was confirmed that the ratios of analysis result and experimental result (C/E values) based on JENDL-5 were almost the same as those of JENDL-4.0. In the special session, the results of sensitivity analysis were reported. Since the results have been described in the proceedings of the AESJ meeting, we add the results of the versions under development of JENDL-5 and discuss their relationship with the reported results of sensitivity analysis.
